Coatings for concrete, asphalt and mineral surfaces to protect against water and chemical damage and to enhance the beauty of the substrate.
Waterproof Coatings & Water Repellents:
AQUELLA
Cementitious waterproof coating for concrete & masonry internal & subgrade walls & floors. Expands minutely upon curing, completely filling pores. When applied correctly, AQUELLA is 100% waterproof. Cures hard white and can be painted with any paint suitable for concrete or overlaid with carpet, wood, etc. AQUELLA is simply mixed with water and painted onto a predampened surface. Coverage of 1 – 1.5 square metres per kilogram. Very cost effective.
Aquella MSDS (Material Safety Data Sheet) AQUELLUX S
Colourless solvent-based Silane/Siloxane water repellent for concrete, bricks, roofing tiles, fibrous cement, etc. Prevents water from entering structure (even rain driven at storm velocities), but allows water vapour to pass from substrate to atmosphere. Helps keep the structure dry, clean and free from growth (moss, lichen and mildew) by reducing or eliminating water entry. Long-lasting (over 10 years for one application), high performance. May be over-painted at a later date. AQUELLUX S should be used to protect all exposed mineral surfaces from water damage. As it does not alter the appearance of the surface, it can also be used to protect architectural structures and plaster coatings, etc.
Aquellux S MSDS (Material Safety Data Sheet) SILAC
Premium acrylic modified silicone water repellent for absorbent substrates, especially Oamaru stone. Provides all the benefits of AQUELLUX S, and the acrylic component provides an anti-dusting/densifying action on dusty surfaces. Very long lasting (over 17 years documented performance). Also recommended for stone carvings. SILAC should be used to protect all Oamaru stone and limestone walls, roofs, etc., and inclined surfaces from damage due to weather, spalling due to frost or freezing and corrosion due to waterborne chemicals.
Silac MSDS (Material Safety Data Sheet)Protective Coatings - Concrete:
CONSEAL
Solvent-based anti dusting concrete floor sealer (also available in grey). Excellent coverage and aesthetic qualities. Easily repaired if damaged in service. Effectively seals the floor against dusting. Recommended for foot traffic areas in warehouses, storage depots, computer rooms, supermarkets etc. Easily applied and low cost per square metre.
Conseal MSDS (Material Safety Data Sheet) HARDCOAT
Clear, non-yellowing acrylic concrete sealer for imprinted concrete, exposed aggregate and plain concrete. Seals concrete against damage from oil, salts and the corrosive action of common chemicals. For driveways, footpaths, swimming pool areas, etc. Apply two coats for maximum protection. Additional coats increase sheen. Satin Finish.
Hardcoat MSDS (Material Safety Data Sheet) Hardcoat Grey MSDS (Material Safety Data Sheet)Please note that to view pdf files, you require Adobe Acrobat or similar installed on your computer.
